Milan Vault carries the entire Tuf-tite plastic riser system. Our standard riser size is 24” inside diameter (I.D.) and they come in 12” and 6” heights. The risers can be screwed together in any combination needed to achieve the desired height. Tuf-Tite lids will complete the riser system assembly. Milan Vault offers Flat, Domed or Concrete-Filled Flat Lids. We provide stainless screws with the purchase of any riser/lid. Since many counties in MI are requiring a secondary safety be installed with new tanks, we carry the yellow Tuf-Tite safety lid as well.
While plastic risers are preferred by many due to their ease of installation, we do produce concrete risers as well. Our concrete risers are 30" O.D. x 12” H (24” I.D.). Tar-based Butyl seal can be purchased to both attach the riser to the top of your tank (3/4" W) as well as between the sections of riser (1/2" W).
If you are looking for a custom or less common size replacement clean-out opening cover, please call to see if we have a mold in stock or can custom make a form to suit your needs.
While plastic risers are preferred by many due to their ease of installation, we do produce concrete risers as well. Our concrete risers are 30" O.D. x 12” H (24” I.D.). Tar-based Butyl seal can be purchased to both attach the riser to the top of your tank (3/4" W) as well as between the sections of riser (1/2" W).
If you are looking for a custom or less common size replacement clean-out opening cover, please call to see if we have a mold in stock or can custom make a form to suit your needs.
|
Riser BasicsStarter Rings |
